Tag Archives: Construction

Hiring a Crane? 4 Cost Saving Ideas You Should Know

Photo of a crane truckTo avoid spending more money on your crane rental service, you need to know the areas where you can reduce the time necessary to finish the job at hand. Partly, this means being smart in your planning and in preparing for the arrival of the crane.

Below are some of the areas you need to concentrate on, which could reduce your rental expenses.

Don’t wait until the last minute

If you need a crane for heavy lifting in Houston, contact a company that offers cranes for rent in advance. You can ask them to commit in writing to avoid any mishap. Make sure the particular type of crane you want is available on the day you need it. This gives you and the crane company ample time to prepare all the logistics to avoid the last-minute disappointments, which can be costly.

Prepare your load

It will be prudent to plan and package your load before the crane arrives. Make sure it is easily accessible from above. If there is any overhead obstruction, such as a tree, you can clear it or move your load. If it’s necessary to get the lifting slings under the load to lift it, make arrangements to have it elevated on the blocks. Achieving the required load preparations will ensure that time is not wasted after the crane arrives.

Choose the right crane

Depending on the nature of your project, ensure that you contact the company and inquire about the available cranes. Choose the right crane that matches the size of your lift. Hiring a more powerful crane than what is required will increase your costs.

Prepare your ground

Before the crane arrives, eliminate all the obstructions in the working area. Make sure the ground is well prepared to ensure safety. If the crane requires a wide operating area, notify your neighbors so they can remove their vehicles.

In construction, every attempt to save on the operational cost is highly welcome. Because crane hire is part of this cost, the above tips will go a long way towards realizing your goal.

Save Costs on Construction Without Compromising Quality

Two workers at a construction siteBuilding a house takes years of wishful thinking, mental saving before you finally decide to take the bold step of seeking finance. Costing is often a challenge to most people because they do not know which areas what to sacrifice without reducing the final quality of the house. If you are one of those people, then you are in the right place because we will give you tips that will sort out your problem.

Select a contractor

The quality of your house and the amount of money you will save in construction has a lot to do with the contractor you employ. Let’s say you are planning a new home construction in Salt Lake City. The first thing you need is to look for a contractor. By welcoming bids, you will probably get more than five interested parties who will offer different solutions.

To make the right choice you need to explain to the contractor about your plan and your estimated budget. A great contractor will advise you on the best materials to use while also considering the issue of cost. The contractor who is willing to stick to your plan without altering your budget is the best since he will not point a blaming finger in case you encounter challenges along the way.

Take a supervisory role

Your contractor will give you a time estimate on when your house should ready. Supervising the work is very important because it is the only thing that will push the contractor to meet the work schedule. In most constructions, exceeding the initial budget comes about because of unnecessary delays that sore up the labor cost.

Take advice

Having your plan and preferences is very important, however, if your contractor advises you to change one or two things it would wise to do so even if it interferes with your budget. Remember the emphasis is on ensuring you get the house while working on a minimal budget. Thus, make every use of the professional advice that you get as it might make a big difference.

There are many ways that you can save cost during construction. However, the primary factor to consider as emphasized above is working with professionals who understand your dream and are willing to make it a reality.

Five Essential Hand Tools in the Concrete Building Industry

A person using a trowel In building concrete structures, hand tools are of great importance. As a matter of fact, they are a must-have for any contractor in the construction sector. While they are manual tools, they are one of the most used. Here are five essential hand tools in the concrete building industry:

1. Wheelbarrows

The wheelbarrow is used to transport building materials from one point to another. In most cases, it is used to carry water, sand, cement and concrete. It is the primary transport tool onsite for materials. Its tray can also be used to make construction mortar.

2. Mixers

Mixers are employed to combine cement and sand during construction. Normally, hand mixers are enough for small quantities of concrete. Larger amounts will need special mixing equipment.

3. Shovels

Shovels are primarily used in the distribution of concrete to fill gaps during the pouring process on the construction site, or when applying small amounts of concrete. They can also be used to mix cement and sand into a mortar. Square shovels have better performance during the distribution of concrete as opposed to the round ones.

4. Trowels

Masonry trowels are used to spread, level, and shape mortar or concrete. Their shapes and sizes depend on the tasks. For example, the bucket trowel is used to scoop the mortar from the bucket. The brick trowel is used to spread mortar on concrete blocks. Its shape makes buttering, the technique of applying mortar on concrete blocks, ideal. There is also a gauging trowel which is used to mix and apply small amounts of mortar in confined areas.

5. Concrete Vibrators

Concrete vibrators are essentially used to release excess water and trapped air pockets from the concrete mixture. The vibrator head should be completely submerged in the mix and held for at least 10 seconds, for the best performance. Moreover, the vibrator should be pulled at a maximum speed of three inches per second. You can achieve the best results by pulling it one inch per second.

For the best outcome in your concrete building projects, getting high-quality hand tools from recognized suppliers is advised, ensuring maximum performance and avoiding losses that may result from inferior quality equipment.

3 Signs That Might Show That You Need Roof Repair

Roof Repairs Can you imagine a property without a roof? Probably not. The roof is a major investment and it needs due maintenance to ensure that its value is maximized. While it can withstand environmental hazards, it’s still prone to damage if ignored in the long run.

Old roofs can cause unforeseen problems for both homeowners and commercial building owners. In fact, even if the roof is only a few months old, it can still cost you more if you don’t do something about its upkeep. Here’s what you need to know:

A Leaking Roof

Early intervention can make a difference between roof repairs and replacement. A leaking roof is the most obvious sign that it’s time to repair or replace your roof. Identifying problems early can prevent water damage and save you money from roof replacement.

Homeowners should not ignore roofing problems like leaks, as this could lead to bigger problems if neglected. Bigger leaks or cracks would mean bigger expenses. To prevent these, you should know when your roof needs the services of a professional roofing services company.

Torn or Damaged Shingles

Torn or damaged shingles can be removed and new ones can be slithered into place. This is advisable if you’re not planning to sell your house soon. This is because replacement shingles might not match the color of the previous ones. If the damage is more substantial but limited to one side of the roof, partial reroofing is also a choice.

Roof Lifespan Maximized

Most roofing systems can last up to 30 years. However, it depends on the location of your house. If you live in an area with a climate that experiences heavy rainfall, windstorms, or snowfall, the roof may only last up to 10 or 15 years.

If you think you have reached the end of the lifespan of your roof, Collins Roofing Inc and other experts say that it’s better to contact professional roofing services that offer leak repairs and roof replacement, or installment options in Salt Lake City.

The roof is one of the most important parts of any infrastructure. Aside from protecting the building from environmental hazards, it shields the people in it from danger. Hence, roof repair is something that needs due attention even if there’s just small leaks or cracks.

Energy-Efficient Building Techniques: A Medieval Case Study

Medieval ArchitectureKeeping warm indoors during medieval times might’ve been terrifyingly difficult, right? This rings true especially for peasants, who only lived in thatched cottages unlike their lords and kings, who stayed comfortable in mighty castles.

Modern architectural and engineering firms, which currently focus on making buildings more energy-efficient, may take a lesson from history books. Perhaps medieval people built their castles with energy efficiency in mind, to survive brutal winters and scorching summers.

An Ode to History

It’s easy to conjure up familiar images when talking about “green buildings” in modern terms. This might include advanced technologies, such as solar panels, extensive use of recycled materials, and other proprietary innovations nearing science fiction-level advancements.

Architects and engineers worldwide, however, aren’t focusing on fancy tech exclusively. In order to “build green,” they’re looking to ancient construction methods.

For instance, many building plans call for maximum air flow to lessen a structure’s carbon footprint. Writing for The Guardian, contributor Leon Kaye cites various modern examples taking from age-old inspirations. They look for ideas in periods when builders had to keep structures as comfortable as possible throughout the year, with fewer resources than what exist now.

Medieval HVAC

Castles present an interesting case study. In a time when air conditioners (and electricity) didn’t exist, these massive fortifications stayed relatively comfortable throughout the year. Being made of stone meant that castles were kept cool.

Tiny windows meant less sunlight entering the building, while thick walls prevented sunlight from streaming in. As a result, nobility and royalty in medieval times stayed frosty throughout summers.

To keep warm during winters, people relied on fire. Torches and braziers, a portable container for hot coals, burned in each room throughout the chilly days. Fireplaces in chambers also provided warmth. It’s safe to say that as the fires burned in close proximity to the thick walls, the castles retained heat.

Lastly, there are tapestries, which not only served as decorations, but also as added insulation.

Who knows? Perhaps recalling history may mean something in terms of designing energy efficient buildings for the future. They were effective back then. They might be effective now.

4 Things Builders Do Before Constructing A Home

Temporary Fence in Wellington A building construction project has several phases involved, with a couple of those stages necessitating completion even before the actual building project has begun. Today you are going to learn four of these pre-construction phases.

If you happen to pass by a construction site where workers are busy building a home or just about any construction project, you may have noticed it is usually fenced-off. In fact, construction companies rarely begin the actual construction of the project without first commissioning a temporary fence hire in Wellington like Superfence to cordon off the area. There are actually lots of things that builders do before commencing with a construction project. These are three of those.

Identifying Scope and Risks

Construction companies, before embarking on a project, would usually study the scope of the project and identify any major risks. These include the size of the building to be constructed and materials to be used. Risk factors include overhead power lines, proximity to other buildings or creeks, and many other similar issues.

Correcting Plans and Designs

Sometimes, there may be a need for some minor revisions due to risks involved like those mentioned above. When this arises, builders would usually redraw some sections and present them to the owner for approval. These plans would involve those that are enumerated in Home Directory. After the issues are resolved, builders then wait for the necessary permits to begin construction.

Permits and Other Legal Documents

The revised plans are presented to relevant government agencies for approval and issuance of permits. Without these permits, as outlined by Doing Business.org, builders cannot begin to move even a single morsel of dirt. Otherwise, they risk being sued by the government. On rare occasions, builders begin the initial phase of the construction while the permit is being processed, but this is seldom done.

Clearing and Setting Up Temporary Fence

The release of pertinent government permits is a signal for construction companies to go ahead with the construction. Usually, the first task they would perform is to clear and level the area. Because of the many hazards present in a construction site, a temporary fence is always erected. This is to bar unauthorised persons from entering the construction site because such individual may meet an accident.

A construction project can involve several phases even before actual construction begins. This is to ensure that the risks are minimised when actual construction begins. Responsible construction companies follow these phases to the letter to avoid unnecessary delays that can arise from accidents, legal issues and many other factors that can affect a building project.