Monthly Archives: May 2017

The Main Types of Cargo Strapping and Their Advantages

Cargo boxesIf you’ve worked with cargo before, then you know how important it is to secure them in place during transport. Even if they are on wooden pallets or large shipment containers, securing cargo is a necessary process to ensure that no damage will happen to the transported goods and the transporting vessel.

One small bump in the road on a poorly strapped cargo truck or one strong misplaced wave in the ocean could lead to a tremendous disaster. While you can’t avoid accidents completely, there are ways to lessen risks and that is through the use of proper poly strapping.

Here we’ll explore the different ways you can secure your cargo, their advantages and disadvantages, and how they can fit in with your operational needs.

Plastic Strapping

For light cargo, the most practical resource would be plastic strapping. They are lightweight, but heavy duty and can withstand most extreme tension forces. They also come in a variety of widths and thicknesses that can fit any situation. The three main kinds of plastic strapping are:

  • Polypropylene has many advantages, but they can heat up under extreme stress. They are also susceptible to ultraviolet damage, so they might not be advisable to store under direct sunlight.
  • Nylon is the strongest of the three types and can withstand much higher loads than its counterparts. Unfortunately, nylon is also expensive which deters most companies from its use.
  • Polyester matches nylon in terms of specific strength but has the lightweight and affordable traits of polypropylene. This is by far the most popular of the three and is in use in most industries worldwide.

Steel Strapping

Plastics have only been recently used in the industry, which means that steel was the go-to resource for the longest time. In terms of strength, steel is the undisputed leader. With zinc-coating, it can hold its own against the elements. One drawback is, even while protected, it can still succumb to rust, which means frequent checks, and replacements are necessary.

If you’re looking for ways for securing cargo, there are many options to choose from. Your decision must be based on the needs of your company and the situations that your cargo will be under.

Maximum Security: Protecting Your Home or Your Business

CCTV on the look outNew Zealand is known for having one of the lowest crime rates in the world. We can never be too careful, however, especially now that crime rates have increased in the last two years. Burglaries, in particular, have increased by 66 percent. With these tips, however, you can protect your home or your business.

Start with the infrastructure

Garage roller doors are great protective barriers for your home or shop. Being made of durable steel, burglars will surely find it hard to enter the premises. Having an alarm system will quickly inform you and your security provider that there is an intruder. Also, having a security camera could help you capture the appearance of the intruder or support your claim for court or insurance. For shops with aisles and corners, you might benefit from surveillance mirrors.

Consider rearranging

For shops, you can limit chances of theft by having an open layout or putting the small easily stolen items, like candy or lighters by the cashier’s stall.

You can consider using display cases to prevent theft. They can also delay robbers’ access to your items if they manage to get into your store when it is closed. If they do not get deterred from the difficulty of breaking the display case, the delay in breaking the case and getting the contents might give your security provider a chance to catch the robber/s before they leave the premises.

For houses, putting items by the windows would make it hard for burglars to enter with ease like a table with a few vases. Burglars will look for expensive portable items that are easy to sell like computers or smart devices. Try to have a lot of storage in your house to hide these when you’re not in so that burglars will have a hard time going through all your cabinets.

Investing in security protects your property and ensures your family or staff’s safety. Being attentive to new faces in your area, and making sure to lock doors and windows can also deter burglars scouting for their next job.

Why Do Pools Pop Out of Their Hole: Explained

Fibreglass PoolFibreglass pool issues come in two types: actual problems and amusing misconceptions. One of the most common myths that pool contractors hear is that fibreglass pools float or ‘pop’ out of their hole.

There’s nothing special about fibreglass pools in this respect. The risk of ‘popping up’ isn’t any higher for fibreglass pools than it is for other types of pools. Big or small, whether fibreglass, concrete or vinyl, any pool can pop up. The question is, why?

The Culprit: Hydrostatic Pressure

Any kind of vessel will pop up with enough upward force exerted on it. The technical term for this upward force is hydrostatic pressure. If water builds up pressure underneath the pool, the structure has nowhere else to go but up, eventually turning the pool into a ‘boat’. The pool will then do what a boat does: float.

The Solution: Proper Installation

One measure that can prevent any pool from floating is proper installation. For all big and small pools in Perth, Guardian Industries recommends seeking proper installation and comprehensive testing.

A relief valve may be added so the water can escape before building up undue pressure underneath the pool and damaging it. Alternately, a construction liner may be installed and tied to the pool pump. The liner will be turned on should there be a need to drain the pool and relieve any present hydrostatic pressure.

A cantilevered edge may also be added around the rim to lock the pool in place whenever required. The pool must have water to weigh it down and hold everything in place.

With proper installation and all the necessary features, a ‘floating’ fibreglass pool isn’t an immediate concern. It’s always best to be informed so that when it comes to choosing which type of pool you want, the choice is based on sound information and not myths.

Wedding Venue Considerations

Man proposing for marriage to a woman

Congratulations! You’re about to marry the person who wants to spend the rest of their life with you. This partnership begins with your preparation for a wedding.

If you’re in the process of choosing your wedding venue, you know you want a place that reflects your taste and preferences. So make sure you choose the right wedding venue in Kent.

Location is Everything

It’s your wedding, so you get to decide where you want to exchange your vows. But remember, you and your partner are not the only ones in attendance. Destination weddings are beautiful, but only if you can afford to fly your entourage. If you want your wedding guests to make it, you might want to choose a wedding venue that is the most accessible to the majority of your guests.

Consider the Weather

Garden and beach weddings are spectacular, as long as it doesn’t rain. While you can always schedule your wedding during the summer season, nature can be quite unpredictable. While some consider the rain as a blessing during a wedding ceremony, it would be hard to see that if your guests are getting soaked. So you might want to consider a wedding venue that has a ready backup plan in case of a downpour.

Make sure your venue has all the amenities and facilities you need

Wedding venues are often well-equipped with almost everything you need for a wedding. But if there are specific things you want for your wedding, tell your wedding organizer so they can prepare. Moreover, you should check the venue’s amenities, such as toilets, parking areas, and rooms. If you intend to ask some of your guests to stay at the venue, make sure there are enough rooms available.

Choose Wisely

It’s your wedding, and you need to make sure it’ll be as perfect as you can make it. Consider these factors so you can choose the right wedding venue.

Powerful Tips to Motivate Yourself Into Productivity

Self motivationAre you having a hard time getting up in the morning or finishing your work? Here are some tips on how to motivate yourself into productivity.

Learn to Reward Yourself

Whether you decide to reward yourself with a new car from a car dealer in Auckland such as Auckland Motors, or a small boat, the technique of paying yourself for motivation will always be effective. The key is to find out what reward best works for you.

It does not have to be big as a new car, though it would be nice if you can afford one. You can promise yourself a massage at the end of the week or a vacation at the end of the month.

Start with the Small Stuff to See Progress

When tackling several tasks, opt to start with the small stuff first and then work your way towards the big ones. It is also better if you create a list with all these tasks and then put a big check mark each time you have accomplished one. This gives you the drive to continue with the rest.

Always Have a Reminder Present

Sometimes, all it takes is to have reminders constantly telling you of what you should be doing and reigniting your motivation. It can be a favourite quote; an image of what you want to achieve; or simply a favourite music that reminds you of what you are capable of.

Create a System that Promotes a Seamless Flow

Perhaps the reason why you are not feeling motivated is that everything is so complicated. It is time to create a plan that helps you seamlessly flow from one activity to another. For example, if your actions make you jump from one place to another, perhaps it is time to rearrange your schedule.

Create a system that lets you plan so that you will not be jittery about what comes next. Assigning a time and date for everything allows you to focus completely on what needs to be done.

Learning how to motivate yourself is a necessity in practically all occupations. Once you learn how to do this, you will find that any task suddenly becomes easier.

Discover the health benefits of dental implants

Woman having a dental treatmentMissing teeth are not only aesthetically unpleasant, but can also cause some serious oral health problems if left untreated. Among the various tooth restoration methods available, dental implants offer several important benefits. Unlike dentures and bridges, dental implants are incorporated into the jawbone and keep teeth strong and healthy.

When natural teeth cannot be saved or have to be removed for health reasons, dental implants are the next best thing. They are preferred by many patients and dentists because nothing comes as close to operating like a natural tooth as a dental implant. Dental implants are available at many specialised dental practices, including Sheen Dental in Richmond.

What are dental implants?

Dental implants are body-friendly, titanium structures, which are surgically fixed into the jawbone, replacing the natural roots of missing teeth. Dental implants can replace a single tooth, a few teeth or a mouthful of teeth. When healed, they act as a solid base to crowns, bridges or removable dentures.

Health benefits of dental implants

Tooth loss can be detrimental to a patient’s self-confidence and oral health. Missing teeth can make it difficult to eat or speak and are responsible for bone loss in the long run. Since dental implants fuse with the jawbone and become a permanent part of the mouth, they provide a long-lasting solution that can both restore confidence and improve oral health. Because dental implants are a permanent tooth restoration, they help to reduce further damage in the jawbone or deterioration in surrounding teeth and gums.

Unlike dentures that reduce biting power considerably, dental implants replace tooth roots and affect biting force. This way patients can continue eating their favourite foods without worrying about pain or loose dentures. Another important health benefit of dental implants is that they feel just like natural teeth, unlike bridges or dentures. Although the latter can replace teeth effectively, they can also irritate the teeth and gums if they don’t fit properly.

Last but not least, dental implants cannot develop cavities on their surface, unlike natural teeth. However, a thorough daily oral hygiene routine is recommended as well as regular dental check-ups in order to ensure their good function and longevity.

A Mother and Daughter in a Museum

Fun and Exciting Family Activities in Albuquerque

A Mother and Daughter in a MuseumIf you’re with your whole family in Albuquerque, maximizing your stay is a good idea. You can do this by engaging in fun activities and by making sure every family member joins in on the fun. Fortunately, there is a plethora of family-friendly activities that you can do in the city. Cliff’s Amusement Park talks about some of them.

Hang Out at Parks

Hanging out at parks is one of the simple yet fun family activities in Albuquerque. Parks are a hit because most of them don’t require expensive entrance fees. Some of these parks feature simple surroundings with trees and clean grounds, while others go all out with zoos, carousels, bumper cars, and roller coaster rides.

Many families choose to spend time at the city’s parks to unwind. There, they can take peaceful breaks from the busy city life. They also get to take advantage of the fact that many of these places are easily accessible and are near the city center.

Visit Water Parks

Visiting water parks is a must-do activity in Albuquerque, too. Especially if you’re on vacation, a trip to a water park in the city can be the highlight of your time-off. The place introduces both adults and kids to incomparable fun!

With the scorching heat of Albuquerque, it’s a great idea to refresh in water parks. There, you can simply hang out by a table and relax, or enjoy thrilling experiences. You can choose to play around in swimming pools, water slides, rides, splash pads, and more.

Go to Museums

Going to museums is also among the common family activities in Albuquerque. Because they feature the most interesting displays (such as maps, figurines, art, and pottery), museums are great places for families. Inside museums, you can simply walk around as you admire the surroundings.

These family-friendly activities are just but a few. In Albuquerque, there is a host of other fun activities that the whole family can enjoy. If you want, you can roam around the city and get to discover what else is out there.

Three Ways to Have a Good Relationship With a SaaS Vendor

A group of employees working on a program Software-as-a-service (SaaS) vendors offer more than an application or software. They provide expertise in a specific area that benefits their clients on a long-term basis, such as a full-service online banking system for credit unions and community banks. So when you engage with a SaaS vendor, you are entering into a partnership that goes deeper than merely buying a product from them.

Of course, you’ll want to have a partnership with your SaaS vendor that is mutually beneficially for both of you. So here are some of the best management practices you can observe when working with SaaS vendors:

1. Include service level agreements (SLAs) in your contract

Many SaaS vendors do not state the level of service they provide in the contract, so make sure you look for it before signing or renewing a contract. If they have promised 24/7 service or 99 percent uptime performance, then you had better receive it once you sign the contract. You can add SLAS through an addendum to the contract, so don’t be afraid to speak up about it.

When dealing with multiple vendors, consider using management software, as advised by MetaSaaS.com. This application can help you keep track of the contract terms during renewals.

2. Ask for the vendor’s security, IT, and financial audits

In a way, you’re outsourcing a part of your business operations when working with a SaaS vendor. Thus, it is important that they meet your corporate and security standards. Most SaaS vendors let their clients take a peek at their security, IT, and financial audits, especially during the clients’ annual audits. If your vendor can’t provide these necessary documents, you might want to look for another provider.

3. Participate in product development

SaaS vendors continually improve their applications to improve their service to their clients. Again, you’re outsourcing a business operation when you engaged with a SaaS vendor, so it is crucial that you have a voice in the SaaS vendor’s product development. Make sure you participate in the user conferences and meetings. This way, you can contribute ideas for future product upgrades.

With these three management tips, you can make certain that both you and your vendor will get the most out of your business partnership — from the beginning until the end of the relationship.

Give Your Fabricating and Welding Firm a Competitive Edge

Man working on a steel productWelding and fabrication rank among the oldest craft known to humanity. Since making a debut more than two thousand years ago, iron working has grown to be an integral part of civilization. From mega structure to small items such as nail clippers, metal products are part of the daily life.

As technology evolves, so does the range of iron and iron-related products. In fact, like fine wine, iron-working skills refine with time. Such developments present you with an excellent opportunity to grow your business.

Refine your processes

With a little bit of effort, you can hone your skills to give you an edge in a dynamic market. Welding and fabricating is an exact science that requires a particular set of expertise and knowledge. It leaves little room for trial and error since any oversight could have serious ramifications.

For instance, weak seams in storage tanks could lead your clients to incur severe losses. The resultant blow back could ruin your reputation and set you down a destructive path.

Similarly, you need to have an arsenal of drilling and tapping machines in your workshop if you are to get the work done quickly and professionally. Such tools increase the quality of your work, improve your turnaround times, and expand your range of products.

 Enhance your exposure

Long gone are the days when a particular type of businesses didn’t have to advertise their goods and services. Increasing competition makes it mandatory to let the world know of your existence. Besides, there are many ways to promote your products without breaking the bank.

You can tell your brand story on the various online platforms and let you prospective clients know of your capabilities. You only need a website and one or two social media pages to create consumer engagement and build brand authority.

Metalworking is a crucial aspect of a growing human population, presenting welders and fabricators with good business prospects. With a little effort and preparation, you can tap into these opportunities and grow your business.

Diabetes: Dessert is Not Always Forbidden

Women eating sweet food in moderationHaving diabetes doesn’t mean you’re not allowed to enjoy sweets forever. With some planning and preparation, you can still eat desserts and manage your condition. While sweets can affect your blood sugar, it is more important to mind your carbohydrate intake, which is responsible for increasing your blood sugar levels.

Revere Health, diabetes management experts in American Fork, share a few tip on eating sweets with the said condition.

Mind the Portion

While it is fine to have dessert, you need to limit how often and how much you consume. The thing with sugar is that it tricks your brain, causing you to crave for more. Fighting the temptation can help, but it is best to have single-serving deserts at home. Don’t buy a whole cake or a box of brownies if you can’t help yourself finishing the entire food on your own.

Eat in Moderation

It is recommended to eat sweets on special occasions, as many of them don’t have enough nutritional value. You, for instance, can eat a small piece of a pie as a snack but be sure to skip starchy foods later in the day. It is also best to choose fat-free or low-fat sweets, as alternatives to sugary desserts. These may include sponge cake, angel food cake, and bite-sized brownies.

Include Some Fruits

Apart from having fiber and vitamins, fruits can be a part of a balanced diet too. You can also add sugar substitutes or fat-free whipped cream to your chosen fruit for extra sweetness. Fruit can be the dessert itself or part of the recipe. Note that some choices can be high in carbohydrates so monitor your servings and don’t eat too much.

Watch the Labels

Some food choices may be advertised as sugar-free, but they still have carbs and calories. Keep in mind that artificially sweetened fruits are loaded with empty calories and low in nutritional value. Avoid eating them in excess, as they can lead to weight gain, making it more difficult for you to control your blood sugar levels.

Moderation and portion control are the keys to enjoying sweets healthily. You can also follow the three-bite rule, which means limiting yourself to just three bites when you want to indulge.